Product ID:200 FLUID 1000 CST
MSDS Date:09/28/1993
FSC:6850
NIIN:01-233-8793
MSDS Number: BVNHC

DOW

SOUTH SAGINAW RD
MIDLAND, MI 48686
US

Emergency Phone: 517-496-5900

Info Phone: 517-496-6000;517-496-4232

Cage: HO826

DOW CORNING CORP

AUBURN, MI 48611 US

Telephone: 517-496-4388

Cage: 71984

SILICON FLUID; (POLYDIMETHYLSILOXANE)

CAS: 63148-62-9

OSHA PEL N/K

ACGIH TLV: N/K

ANY SAFETY PRECS APPLIC TO CLEANING MATL BEING

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

ST, & FED REPORTING REQS MAY APPLY TO SPILLS/RELS OF

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: DIRECT EYE CONT MAY CAUSE TEMP
DISCOMFORT W/MILD REDNESS & DRYNESS SIMILAR TO WINDBURN. SKIN:
SINGLE PRLNGD EXPOS (24-48 HRS) CAUSES NO ADVERSE EFT. INHAL: NO
IRRIT TO EYES & RESP PASSAGES. NO IN J LIKELY FROM RELATIVELY SHORT
EXPOS OF<8 HRS. INGEST: SML AMTS TRANSFERRED TO MOUTH BY FINGERS
DURING(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZS: USE, ETC., SHOULD NOT INJ.
SWALLOWING LRG AMTS MAY CAUSE DIGESTIVE DISCOMFORT. COMMENTS: WHEN
HEATED TO TEMPS >150C IN PRESENCE OF AIR, PROD CAN FORM
FORMALDEHYDE VAPS. FORMALDEHYDE IS POTN TL CANCER HAZ; KNOWN SKIN &
RESP SENSITIZER; AND AN IRRITANT TO EYES, NOSE, THROAT, SKIN, AND
DIGESTIVE SYSTEM.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:TREAT SYMPTOMATICALLY. EYE: IMMEDIATELY FLUSH WITH WATER FOR
AT LEAST 15 MINUTES. SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER .
INHALATION: REMOVE FROM EXPOSURE. SUPPORT BREATHING (GIVE
OXYGEN/ART IFICIAL RESPIRATION) . INGESTION:CALL MD IMMEDIATELY .

Flash Point:>214F,>101C
Extinguishing Media:CARBON DIOXIDE (CO*2). WATER. WATER FOG (OR SPRAY).
DRY CHEMICAL. FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:DISP OF COLLECTED PROD, RESIDUES, & CLEANUP
MATLS MAY BE GOVERNMENTALLY REGULATED. OBSERVE ALL APPLIC LOC, ST,
& FED WASTE MANAGEMENT REGS. MOP UP, OR WIPE UP, OR SOAK UP
W/ABSORB & CONTAIN FOR SALVAG E/DISP. FOR LRG SPILLS, PROVIDE
DIKING OR (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID EYE CONTACT. USE REASONABLE
CARE. THESE PRECS ARE FOR ROOM TEMP HNDLG. USE AT ELEV TEMP, OR
AEROSOL, SPRAY APPLICS, MAY REQ ADDED PRECS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL VENTILATION RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGG .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASHING AT MEALTIME AND END OF SHIFT IS
ADEQUATE.
Supplemental Safety and Health
SPILL PROC: OTHER APPROP CONTAINMENT TO KEEP MATL FROM SPREADING. CLEAN
ANY REMAINING SLIPPERY SURFS BY APPROP TECHNIQUES, SUCH AS: SEVERAL
MOPPINGS/SWABBINGS W/APPROP SOLVS; WASHING W/MILD, CAUSTIC D
ETERGENTS OR SOLNS; OR HIGH PRESS STEAMFOR LRG AREAS. FOR
NONSILICONES,USE TYPICAL INDUS CLEANING MATLS. OBSERVE(ING 2)

Spec Gravity:0.97 @ 25C
Solubility in Water:NONE
Appearance and Odor:COLORLESS LIQUID, ODORLESS.

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE REACTION.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:SILICON DIOXIDE. CARBON OXIDES AND
TRACES OF INCOMPLETELY BURNED CARBON COMPOUNDS. FORMALDEHYDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.